Tools & Materials needed:
Two Screws or Bolt Hooks for the Pulleys (Depending on the Ceiling)
Two Screws or Nails for the Wall Cleat
- Place steel rods in sleeves at top of bag.
- Uncoil chain & rope and attach the chain to the steel rod ends.
- Put a 6” hose clamp under the webbing at the bottom of the bag, place wire reinforced clear tubing inside the bag & tighten the hose clamp. Put the next hose clamp over the tubing, now insert valve and tighten the hose clamp.
- As shown in sketch, attach the pulley to the ceiling and the cleat to the wall. Now thread the rope through the pulleys and hoist up the dispenser bag, tie off the rope at the cleat.