| Item |
Description |
Price |
Add to order |
| Scale Option |
Eagle Stretch Wrap Machine
Integrated Scale for 59" and 64" turntables
- LED Display |
$3,800.00 |
|
| Printer |
Zebra GK420D Thermal
Printer/Mount/Integration & Programming 4 x 6" peel & stick
labels w/ weight, date & time |
$935.00
|
|
| RAMP-EPJ |
Ramp for Electric Pallet Jack
110" - long x 50" wide |
$1,075.00
|
|
| RAMP-WS-HPJ |
Scale Option Ramp for Manual
Pallet Jack Height Adjustable 59" long x 42" or 50" wide |
$675.00
|
|
| RAMP-WS-EPJ |
Scale Option Ramp for Electric
Pallet Jack Height Adjustable 110" long x 50" wide |
$1,200.00
|
|
| ROPER |
Manual roping device for 20" film carriage |
$730.00
|
|
| AFCO |
Auto Film Cut Off -
Automatically cuts film at end of wrap cycle - 60 gauge
minimum thickness |
$535.00
|
|
| 30" Film Carriage |
30" film carriage/250% powered pre-stretch |
$930.00
|
|
| Black Photo Eye |
Upgraded Black Photo Eye Sensor
(Part# RLK288H2000IRZ31116) For use with Black Products or
Film |
$490.00
|
|
| Ultra Sonic Photo Eye |
Upgraded Ultra Sonic Photo
Eye Sensor
(Part# UC4000-L2-E6-V15) For use with metal drums, fencing
and/or other voids |
$790.00
|
|
|
ITS |
ITS Increased
Turntable Speed from 12 RPM to 14 RPM |
$150.00 |
|
|
Cold Weather
Package |
Thermostat controlled mini heater with
fan & integration, that is good down to 20 degrees F
|
$800.00 |
|
| |
|
|
|
|
|
The Eagle 2000A series stretch
wrapper is assembled in the USA and features a non-powered
pre-stretch unit to maximize film efficiency. Using an electronic
photo eye, the Eagle 2000 automatically recognizes load height and
adjusts carriage travel to create an effective wrap cycle. The
turntable offers a soft start and soft stop feature to ensure gentle
handling of the load being wrapped. The turntable resets itself
automatically upon completion of each load. The available features
provide for increased production and a cost per load savings that
can easily justify owning an Eagle 2000 series stretch wrapper.
Economical price, efficient design and quality craftsmanship in an
entry level stretch wrapper.
*The Eagle 2000A stretch wrapper features a non-powered
pre-stretch unit.
Non-Power Prestretch
Free Standard
Pallet Jack Ramp
Semi-Automatic
or Manual Operation
PLC (Programmable Logic Controller)
LCD Display with Integrated Controls
ALHS (Automatic
Load-Height Sensor)
Automatic Turntable Reset to Home Position
Soft Start/Stop Turntable
Handles
Pallet Load Profiles A, B,
& C
5 Programmable Wrap Modes
1. Auto mode: Hit start button and the machine
will wrap based on the pre-set numbers. Bottom wraps 1-9, top
wraps 1-9, film over lay 2-4 inches.
2. Manual mode:
You control turntable button 1, film carriage up button 2 and down
button 3. You can also stop the film carriage in the middle of the
pallet if you want to apply extra film on the middle of the pallet.
This mode is good for loads lower than the photo eye or where you
want to use different wraps than in auto mode.
3.
Slow mode: This mode good for very light loads. It
distinguishes the pre-stretch and force to load on the wrap up. This
wrap stabilizes load. On the way down the pallet is wrapped
according to the settings in the auto mode.
4. Single
wrap: Just wraps on up cycle according to settings on auto
mode and then the film carriage goes down, but does not wrap.
5. Top wait mode: Up cycle is wrapped according
to auto mode. Once the film carriage reaches the top of the pallet
it stops. Then the plastic wrap or corrugated sheet is put on the
pallet. You hit the start button and film carriage wraps on the way
down.
|
